taobaowang9.com

Before you begin to actually look at tractors you should know exactly what you are looking for.

Consider the following questions when shopping for a tractor.

What size of tractor do you need?

What are you going to be using you tractor for?

How often will the tractor be used?

Is the tractor going to be used to produce income? Of course, money is often a consideration when shopping for a tractor. Consider talking to people that own tractors and get their opinions.

Be an informed shopper and don’t let anyone rush you. Below are some other things to consider before you begin shopping for a tractor.

Tractor Size

This is obviously the most commonly asked questions regarding a tractor purchase. The average compact tractor consumer owns a 1-5 acre piece of property and uses the small compact diesel mostly for mowing The other tractor consumers usually have between 10-30 acres and needs about a 30 horsepower to complete the necessary tasks.

What are you going to use the tractor for?, is of course, the most important question to answer. Is it just for mowing or will you be using a loader or backhoe on it? Will you be working on rocky or uneven ground?

Dollars & Sense

You should definitely shop around, however, don’t forget that if you are comparing the prices of different makes and models of tractor it can sometimes be much like comparing apples to oranges. As with anything else, some makes and models are made better than others. A few more dollars upfront in price for a better quality of tractor makes more ‘sense’ than having to pay the cost of constant repairs and maintenance.

Different Makes and Models of Tractors

If at all possible, one of the best things you can do to make your life easier, is to purchase a tractor that is easy to get parts for. There are many foreign makes and models that are exact matches to domestic tractors. With that in mind, you can get a parts book for U.S. made tractor and purchase the corresponding part numbers that way. Some parts dealers don’t like to sell parts for a gray market tractor. In fact, dealers of some brands of tractors are being told by a higher authority that they cannot willingly sell parts for gray market tractors.

Diesel Engines

Make sure you get a tractor with a diesel engine. Diesel engines have better performance and usually last longer than gas engines. Implements also work better on diesel engine tractors.

Horsepower

Approximately how many horsepower will you need? One horsepower (hp) is the amount of energy required to lift 550 pounds, one foot, in one second. In a tractor the energy is produced from torque and engine speed. A 100 hp tractor is one with a maximum of 100 horsepower available at the power-takeoff (PTO) outlet.

PTO

Nearly all Japanese tractor manufacturers include the power take off (PTO) horsepower (hp) in their model numbers; however, they do not include the engine (fly) hp. The first two numbers of the model number is where you find the PTO hp. The PTO hp is important because it is telling you the equipment working power of the tractor. It tells you what horsepower that equipment requiring a PTO will get from the tractor. Click here for a more in depth explanation of PTO.

Cylinders

Consider getting a three or four cylinder tractor. Three and four cylinder tractors are generally newer tractors and run quieter and smoother than the two cylinder models. Transmissions

There are several different types of transmissions for tractors. If you are not knowledgeable about tractor transmissions, it would be a good idea if you familiarize yourself with the different types listed below, so that when you go out to shop for a tractor you will well informed.

Manual transmissions on tractors were made to be shifted while the tractor is not in motion. This will cause a grinding noise due to the fact the two gears that are trying to mesh are rotating at different speeds. Manual shift transmissions are known for their durability, however, they are not considered to be very user friendly. The sliding gear and the collar shift are two of the more common transmissions.

Synchro Shift transmissions are basically collar shift transmissions (a type of manual transmission, see above). The difference is the added synchronizers, which makes it so that the gears don’t grind if you are trying to shift while the tractor is in motion. Some synchro shift transmissions only have one pair of synchronized gears, while others have all speeds synchronized, including forward and reverse. The synchronization of forward and reverse is called the shuttle shift. This synchro shift is a dependable transmission, however, just like with automobiles, the more ‘tricky’ the tranny is, and the more chance there is of something going wrong or breaking.

A Power Shift transmission is an option well worth considering. Not those standard shift transmissions won’t work just fine; however, often power shift is a nice little luxury, depending on what you are going to be using the tractor for. With a power shift transmission you can choose different speeds while the tractor is in motion, without needing to use the clutch pedal.

Hydrostatic transmissions operate in a closed loop, the flow of the pump is reversed, which in turn causes the tractor to reverse directions. The hydrostatic transmission is considered to be very dependable and is able to defend itself against ‘operator difficulty’. Because this is transmission is controlled by a foot pedal, when you take your foot off of the pedal the tractor will stop, this is a nice safety feature. Hydrostatic is considered the best selection for such things as large mowing jobs because it allows for easy direction change and continual, unchanging speed.

Implement Adaptability

You will want a tractor with a Category 1, 3-point hitch and standard rotation PTO shafts. Most imported compact tractors are equipped with these items; however, there are a few that are not.

Implement Availability

Before you purchase a a tractor, make sure that good quality implements are available for it. It is a good idea to try to find a tractor with as many model-specific attachments as possible. These include things such as loaders and backhoes, which have custom-fitted mounts that are not interchangeable with other makes and models of tractor. You can often save money if you purchase the implements at the same time you purchase the tractor and some implements can be very expensive to add on at a later time.

Parts Manuals

Sometime parts manuals can be very hard to acquire. Make sure there is one available for the tractor you choose. Ask how much the manual is, sometimes the cost can be over $100.00 dollars.

Warranty

Find out what kind of a warranty comes with the tractor. Find out what it covers and for how long. Below is a checklist that you can print and take with you when you are out shopping for a tractor. Just check things off and take notes as you check over the prospective tractor.

Yes, it’s a very long checklist, but well worth your time if you want to get a good quality tractor at a fair price.

Some things on the checklist may not pertain to the type of tractor you are looking for; however, we believe that most folks will find the majority of information here to be very helpful.

Your goal is to ensure that the tractor you purchase is all that the seller says it is and doesn’t have any hidden problems. Make sure you know what you are looking for. Know what options you must have on the tractor and which ones you might be willing to compromise on or be able to add later.

Tractor Buyer’s Checklist

Make_____________________________ Model _____________________ Year _________ Hours

On Meter________ Asking Price $____________

Seller’s Name _____________________________ Phone ______________

Tractor Location _______________________________________________

Yes/No Notes

Visual Exterior Inspection

Does the overall appearance of the tractor look as if it has been cared for?

Why is the tractor for sale?

Is the paint faded?

Is the sheet metal straight?

Are there a lot of ‘dings’ in the tractor?

Are there any decaying rubber or plastic components?

Are there any structural cracks? Look closely for hairline cracks.

Is there anything that looks like a ‘makeshift’ repair job?

Are the tires in good condition with good tread left on them?

Is there a calcium mixture added to the tires for better stability?

Is there still good tread left on the tires?

Is the seat in good condition?

Does it have a standard 3-point hitch?

Are there any puddles of fluid under the tractor?

Are there any oil spots on the ground around the wheels?

Engine Inspection

Is the engine warm?

Are there oil and/or fuel on the engine?

Can you see any seals leaking?

Is there oil around the rear axles, near the rear wheel?

Is there oil around the PTO seals?

Are there oil leaks around the output shaft seals gearboxes? (4WD

Is the engine oil at or near the full mark?

Is the front axle dipstick at or near the full mark? (4WD)

Does the oil look clean? Black is ok for diesel engines.

Are there creamy white droplets near the top of the dipstick?

Are all the filters U.S. made?

Is the air filter intact?

Does the air filter have any tears or holes in it?

Is the fuel filter clean?

Is the fan belt tight and in good shape?

Does the air inlet tube have any cracks or holes in it?

Is the water in the radiator dark green? This is a good thing.

Does the radiator water have a milky looking scum to it?

Is there flaking or discolored paint around the radiator cap?

Is there moisture along the bottom of the radiator?

Is there any slop in the steering linkages?

Did you closely look over the tractor a second time to make sure you didn’t miss anything?

Running Engine Inspection

Does the oil pressure register when you just turn the key?

Start the tractor. Does it start easily?

Does the oil pressure light go off or the oil gauge go up to about 30-80 psi?

Do all of the other lights go off?

Is the voltage meter (if it has one) charging a full 13.5-14.5 volts

Did you rock the steering wheel from left to right? Do this with the engine running if the

tractor has power steering.

Does the PTO spin in all gears?

Does the 3-point hitch work properly?

Does the tractor continue to smoke after it warms up?

Driving The Tractor (This is the fun part)

Does the tractor work through all of the gears?

Does the power shift feel ‘weak’ when shifting?

Is there any slippage when you quickly accelerate into high gear?

Does the 4WD engage properly?

Does the clutch slip?

Do the brakes work well?

Did you check the brakes by pushing one pedal at a time in low gear?

Does the tractor make any clunking noises from inside the engine?

Does the charging system work properly?

Do the wheels wobble at all?

Hydraulics

Are the control levers in good shape and not flopping around?

Are the pivot pins badly worn?

Does any oil seep out of the extended spools (control valves)?

Are the hydraulic couplers capped?

Does the hydraulics work correctly?

Post Driving Inspection

Did the temp gauge ever get above the recommended temperature?

Did the temp light ever come on while you were driving it?

Did the tractor overheat?

Did the tractor run well even after it got hot?

Do you see any new leaks from the radiator?

Do you see any new oil and or fluid leaks?

Did you see excess smoke when you removed the oil cap?

Did you closely look over the tractor a third time to make sure you didn’t miss anything?

I Hope this has been a lot of information that you where looking for and you will use this information to your advantage and be safe with it.

Ebooks and Articles are the Love of my Life. Visit Me [http://www.macsebooksparadise.com]

Sherry Cochran [http://www.macsebooksparadise.com]

Indie film financing and movie distribution reminds of what it would feel like dancing nude on stage (much respect for exotic dancers at Larry Flynt’s Hustler Club!). You show up to pitch your movie project and need to be able to dance to a film investor’s music. It’s their stage and not yours as an indie filmmaker seeking film funding. They want you to make a sellable movie which appeals to movie distributors so the production can make money.

Most investors I’ve met with are not interested in putting hard money into indie art house films because those are tough sells to movie distributors and overseas film buyers aren’t usually interested in seeing them. The dialogue and scenes of certain art house type films don’t translate well to foreign buyers and movie viewers. Action, horror and skin does not need subtitles for people to follow the story is what I’ve been told by distributors. Talking head movies can make no sense to viewers that don’t understand subtle lines spoken in a foreign language.

Independent film financing continues to change as indie movie distribution gets more financially shaky. The place it’s hitting indie movie producers hardest is right at the source – film financing. Film investors right now aren’t feeling excited about putting money into movies that do not have bankable name actors. This is not like so-called indie movies that have A-list actors or are produced for millions of dollars. Those type of indie film passion projects you can make once you’ve made it in the entertainment business at the studio level.

Indie film investors and movie distributors won’t expect you to have an A-list actor, but they do want producers to have actors (B-list or C-list or D-list) with some name recognition or celebrity. The first question film investors and movie distributors ask is who the cast is. This is where most indie movie producers are blown out of the water because they have an unknown cast of actors. Plus there is a glut of indie movies being made because technology has made it more affordable to make movies.

The bright side is that entertaining indie movies are being made that might not otherwise ever have seen light of day before. The downside is meaningful movie distribution (getting paid) for indie produced films continues to shrink as indie films being made rises (supply and demand 101). I talked to one movie distributor that caters to releasing independent films and they told me they receive new film submissions daily.

They were honest saying they get very sellable movies and ones that are less than appealing, but with so many movies out there they no longer offer a majority of producers advance money against film royalties or pay a lump cash “buy-out” to secure distribution rights. Their business viewpoint is most indie filmmakers are just happy seeing their movie released. The term they used was “glorified showreel” for an indie filmmaker to display they can make a feature film. So, they acquire many of their movie releases without paying an advance or offering a “buy-out” agreement.

Not making a profit from a movie does not make financial sense for film investors that expect to see money made. When people put up money to produce a movie they want a return on their investment. Otherwise it’s no longer a movie investment. It becomes a film donation of money they’re giving away with no expectations. I’ve been on the “dog and pony show” circuit meeting with potential film investors and learning invaluable lessons.

I’m in the habit now of talking to indie movie distributors before writing a screenplay to see what types of films are selling and what actors or celebrity names attached to a potential project appeal to them. This is not like chasing trends, but it gives producers a sharper picture of the sales climate for indie films. Sometimes distributors will give me a short list of actors or celebrities to consider that fit an independent movie budget. Movie sales outside of the U.S. are where a bulk of the money is made for indie filmmakers.

Movie distributors and film sales agents can tell you what actors and celebrity talent is translating to movie sales overseas at the indie level. These won’t be A-list names, but having someone with some kind of name is a great selling point to help your movie standout from others. Brief cameos of known actors or celebrities used to be a good way to keep talent cost down and add a bankable name to your cast.

That has changed lately from my conversations with distribution companies. Movie distributors now expect any name talent attached to have a meaningful part in the movie instead of a few minutes in a cameo role. Cameo scenes can still work if there is a visual hook that grabs the attention of viewers in some way. But having name talent say a couple of lines with no special hook won’t fly anymore.

Another way to make an indie film in need of funding more attractive to investors is to attach talent that has been in a movie or TV show of note. Their name as an actor might not be that well-known yet, but rising stars that have appeared in a popular movie or TV show can give your movie broader appeal. If you cast them in a supporting role keep working days on the set down to a minimum to save your budget. Try to write their scenes so they can be shot in one or two days.

When you’re pitching to serious film investors they will want to be given a detailed movie budget and distribution plan on how you plan on making money from the film’s release. The Catch-22 that happens a lot is that most movie distributors that cater to releasing indie films won’t commit to any deal until they’ve screened the movie.

There is not built-in distribution like with studio budget films. Film investors that are not traditionally part of the entertainment business can get turned off when a producer does not have a distribution deal already in place. They don’t understand the Catch-22 of indie filmmaking and distribution. This is where a movie producer really needs to have a solid pitch that explains the financial dynamics of indie film distribution.

Most film investors will pass on an indie movie producer’s financing pitch that mentions self-distribution in it. From a movie investor’s business perspective it takes entirely too long for an indie movie to generate money going the self-distribution route. It’s like the old school way of selling your movie out of the trunk of your car at places, but now it’s done online using digital distribution and direct sales via a blog. That’s a long grind that most investors will not be interested in waiting around for. Moving one unit of a movie at a time is too slow of trickle for investors.

A possible way around the Catch-22 is to reach out to movie distributors while you are pitching to film investors. With a firm budget number and possible cast attached you can gauge to see if there is any meaningful distribution interest in the movie. It’s always possible a distributor will tell you that they would offer an advance or “buy-out” deal. They usually won’t give you a hard number, but even a ballpark figure of what they might offer can let you know if your budget makes financial sense to approach movie investors with.

I know one savvy indie movie producer that makes 4-6 movies a year on very reasonable budgets and knows they’re already making a profit from the advance money alone. The film royalty payments are a bonus. The producer keeps budgets extremely affordable and streamlined at every phase of production. Once you have a track record with a distribution company you know what you can expect to be paid. Then you can offer film investors a percent on their money invested into the production that makes sense.

Social networking with other indie filmmakers lets you hear what’s happening with movie distribution from other people’s real life experiences. A cool thing I’ve been hearing about is that there are film investors that won’t put up money to make movie that is going to be self-distributed, but they will roll the dice on a feature that is going to specific film festivals. Not the art house film festivals. The ones that are very genre specific like for horror or action films. Like Screamfest Horror Film Festival or Action on Film (AOF). Film buyers attend these events and meaningful distribution deals are made.

Independent film financing and movie distribution are areas of the entertainment business all filmmakers will have to deal with and learn from each experience. I was in the hot seat today pitching to a film investor. I’ve streamlined the budget as much as I can without making the plot lose steam.

The jam I’m in as a producer is there are hard costs that cannot be avoided that include lots of gun play including two rigging shots where baddies get shot and are blown backwards off their feet. Badass action films need experienced and seasoned film crews to pull-off hardcore action shots off clean and safe. The cast I want to hire has the perfect appeal and name recognition for this indie action movie to rock viewers. There is nothing that can get lost in the translation in this film for foreign film buyers and movie viewers.

What I think got lost in the translation with the potential film investor today is if I keep taking out below-the-line crew to save money I’m going to have to do rewrites to the screenplay to take out action scenes. These are selling points that will hurt sales if they are written out. But it’s my job as an indie filmmaker to balance a budget that appeals to film investors. We’ll see how this goes. This is indie filmmaker Sid Kali typing fade out.

Get the inside scoop on writing, producing, directing, and movie distribution at Slice Of Americana Films. Check out the life and times of filmmaker Sid Kali.

A blog is a type of website maintained by means of regular entries of commentary, descriptions of events, graphics and or video. A blog is a very simple method for promoting your individual internet business opportunity with practical and valuable content; content that can be applied to any business whether online or offline.

The written content you post on your blog is referred to as a “blog post.” Your blog posts can show up in the search engine results of Google for specific keywords that are in your posts. For example, if you wrote a blog post about “the difference between top tier direct sales and MLM,” your blog could show up in Google’s results when someone searches for “top tier direct sales”. Blog post entries are generally displayed in reverse-chronological order.

Blogs provide commentary on a particular subject or can function as more personal online diary. A typical blog combines text, images, and links to other blogs, web pages, and other media related to its topic. The ability for readers to leave comments is an important element of many blogs. Most blogs are generally text, although most will also include photographs and videos. Micro blogging is another type of blogging, featuring very short posts.

The following list provides some incredible statistics and the significance of a blog for today’s internet marketer.

Blogosphere Stats
133,000,000 – Number of blogs indexed by Technorati since 2002
346,000,000 – number of people globally who read blogs (COM Score March 2008)
900,000 – Average number of blog posts in a 24 hour period
There are many different types of blogs, differing not only in the type of content, but also in the way that content is delivered or written. The following are only a few examples:

Personal Blogs
The personal, traditional blog is the most common form of blog. It is an ongoing diary or commentary by an individual. Few personal blogs rise to fame but some personal blogs quickly acquire a widespread following. Microblogging is form of a personal blog which is extremely detailed and seeks to capture a moment in time. Sites such as Twitter and Facebook allow bloggers to share thoughts instantaneously with friends and family and are much faster than e-mailing or writing.

Corporate and Organizational Blogs
A blog can be private or it can be for utilized for business purposes. Blogs used for marketing, branding or public relations purposes are called corporate blogs. Similar blogs for clubs and societies are called club blogs, group blogs, etc.; typically used to inform members and interested parties of club and member activities.

By Interest
Some blogs focus on a specific subject, such as political blogs, travel blogs, house blogs, fashion blogs, education blogs, music blogs, legal blogs, etc. Two common types of genre blogs are art blogs and music blogs.

By Media Type
A blog comprising videos is called a vlog, one comprising links is called a linklog, a site containing a portfolio of sketches is called a sketchblog or one comprising photos is called a photoblog. Blogs with shorter posts and mixed media types are called tumblelogs.

A blog is primarily a website that allows you to quickly and easily add fresh content whenever you wish. Blogs are easy to publish (you only need to know how to type, easy to find (your audience can easily find your content), social (a great way to build a presence in the online community), viral (your blog posts can be virally distributed), and easy to link to and from. Blogs do require frequent and ongoing maintenance as the addition of fresh content – writing, photos, video, etc. – is necessary in order for a blog to remain effective. The content should be relevant, informative, thought provoking, etc…

There are many different blogging platforms. If you are new to blogging WordPress.com is a very simple platform for ease of setup. WordPress provides flexibility, tutorials and support and you can easily migrate your content from one blogging platform to another should you choose to switch platforms in the future. Do be aware WordPress.com can place ads on your website. However, this can be avoided if you choose to use WordPress.org By paying for you hosting, which is very minimal in cost, you gain total control of all your content without unsolicited advertisements. And most importantly you avoid the risk of never being suspended.

Now the following are a few basic action steps to start you blogging experience:

1. Sign up for a WordPress Account
2. Select a theme
3. Select a hosting account (this can be done at a late time)
4. Write Your First Blog Post

Easy Ways to Get Blog Post Ideas:
• Write down 5 things you learned today, and post it on your blog.
• When you learn something new, post it on your blog.
• When you do something fun, post it on your blog.
• When you make a video, post it on your blog.
• When you take new pictures, post them on your blog along with a description of what you did.
• When you have a strong opinion about something, post it on your blog.
• When you submit a new article or press release, post the link with a brief summary on your blog.
• If you have the solution to a common problem in the industry, make a blog post.

5. “Ping” It
When you “ping” your blog you are notifying the search engines that you have new content on your blog.
• Step One: Go to Pingomatic.com
• Step Two: Enter the name and the URL of your blog.
• Step Three: Click all blog services to Ping.
• Step Four: Make sure you ping every time you update your blog with new content.

6. Manage Comments
Comments are good; it means you have active readers. Make a point to respond to your readers who take the time to leave a comment. If someone makes a general comment you can always respond with “Thanks for your comments. They are valued.” If you disagree with a comment one of your readers let them know WHY you disagree. Don’t be defensive or confrontational. Be open to joining the conversation and supporting your opinion in a rational effective manner. Remember, you want to give your readers a reason to regularly return to your blog.

You are now on your way to becoming a professional blogger. Here are several basic tips and tricks.

• Don’t ever plagiarize. If you are quoting content from another source be sure to cite your references and include any appropriate links.
• Always be yourself and be original.
• Share your opinions.
• Avoid clichés.
• Provide Fresh Content
• Provide real content, not just sales’ pitches. Your blog posts should not sound like sales’ pitches. You should be sharing valuable thoughts, ideas, and opinions with your readers. As a general rule in blogging and in marketing in general, you want to provide 80% content for every 20% sales pitches.
• Engage in meaningful dialogue with your readers through comments. Your audience will increase as your readers share your blog with their circle of influence and they’ll be more likely to do this if you take the time to acknowledge their interest in your blog.
• When sharing your opinions, consider framing your thoughts in such a way where you acknowledge that you could be wrong. If you come across as being close-minded to new ideas or other viewpoints you run the risk of turning your readers off. However, if you pose your opinions from a “here’s what I’m thinking right now” perspective, you could encourage some healthy debate in your comments. With that said, some of the most successful blogs are highly controversial and unapologetically opinionated.
• Check out other blogs. Examine other blogger’s styles and discover what you like and what you don’t like.

The following are several more advanced suggestions:

1. Blogging Etiquette
When you include a link to another site in your blog post WordPress will automatically “ping” that site letting them know you just linked to them. If both blogs are on the same platform you should see a reference to your trackback link in their comments section. When someone links to your blog you should always go check out their blog and then leave a thoughtful, intelligent comment on their blog. Include your blog’s URL with your name in the comment and this will not only foster two-way communication between you and the other blogger, but will also encourage their readers to also check out your blog.

2. Submit Your Blogs to Web 2.0 Sites
You can get ranks to specific keyword posts with the keyword by submitting your post to all the Web 2.0 sites with a service called Socialmarker.com. After you input your title, URL, descriptions and your username and password to each site, Socialmarker will submit your post to 20 to 30 Web 2.0 sites for you with one-button simplicity.

3. Optimize Your Blog for Search Engines
If you have a post that you want to push up in the search engine results you will want to have your keywords in the title of your post, in the first paragraph and in the closing or concluding paragraph.
A simple trick to include your keyword or keyword phrase in your title is to create a title such as “How to find/do (insert keyword)”.

As you become proficient with blogging you might want to consider advertising on your own blog. To accomplish this you will have to setup a self hosted blog i.e. WordPress.org. This will allow to place your own text or banner ads on your site or to take advantage of an advertising network such as Google AdSense. A self-hosted WordPress.org site will also provide you with much more flexibility with the layout, design and advertising options on your blog.

For additional information on blogging and internet marketing strategies to get your internet business opportunity off the ground please C1ick Today’s Internet Entrepreneur

This article answers some of the questions asked

by car owners or would be Do It Yourselfers on Do It

Yourself Auto Repair.

What is DIY or Do It Yourself Auto Repair:

This is a maintenance system where a vehicle owner carry

out specific repair works on his/her car. The repair

work can be major or minor.

Can anybody carry out Do It Yourself Auto

Repair: Yes, anybody old enough to own a car, and

calm – headed enough to follow some sets of repair

instructions can successfully carry out Do It Yourself

Auto Repair.

It does not require deep knowledge of engineering

or mechanism, just the ability to believe in yourself

and follow instructions.

What are the requirements for Do it yourself auto

repair: The following are the basic requirements,

which may be more, depending on the repair job to be

done.

• A good auto repair manual.
• Set of tools.
• Auto parts for replacement.
• Calmness and determination.
• Time.

From manual you can get all the requirements and the

procedures.

Where Can Do It Yourself Auto Repair be carried out:

Anywhere there is space. preferably in a place where

there is privacy and where you are shielded from

sun, rain, etc.

Can I get help for Do It Yourself Auto Repair jobs when

I needed one: Yes you can get a real life help if you

register with a good auto repair site and/or auto repair

forum for car owners.

There you meet car owners like yourself sharing their

experiences in Do It Yourself Auto Repair job and their

failures too, you learn a lot and avoid many pitfalls.

What are the benefits of Do It Yourself Auto Repair: you

stand to gain a lot in Do it Yourself Auto Repair, Some

benefits includes:

1. Reduction in repair and maintenance cost.
2. Self Satisfaction in carrying out your repair works.
3. Better understanding of your car system and operations.
4. Opportunity to meet/chart with other car owners,
   share ideas and gain from their experiences.
5. Ability to gain total control over your car.

The total benefit of Do it Yourself Auto Repair cannot

be generalized it depends on where an individual is

starting from and his background knowledge. You really

see it when you start.

What is the rate of success in Do It Yourself Auto

Repair: The rate of success figure is not constant, for

it depends on individual knowledge and what he has

committed to it.

But a lot of people have been recording

success, this you can find out in DIY forum sites. even

people that started as a complete novice.

The important things to hold to record success is,

having the right tools equipment and starting/doing your

Do it Yourself Auto Repair jobs rightly. This I can show

you.

You may have many more questions not answered here, but

you don’t need to know all answers before you start,

just a step-by-step guide. if others have been doing it

then you can do it.

Why not start right now.

Tope Olawumi is a seasoned auto – infopreneur. His site at

http://www.all-about-auto-part.com/Do-It-Yourself-Auto-Repair.html shows you all the information you need to do your Do It Yourself Auto Repair right. For your right manual visit;

http://www.all-about-auto-part.com/Do-It-Yourself-Auto-Repair-Manual.html.

It may be hard to believe but a fish tank will require a lot of care and management. If you have had problems in keeping your fish alive even for a few months, you will need to take a closer look at your fish tank. It may sound simple but it’s anything but simple. Taking care of the aquarium will require some effort on your part and you will need to plan in advance in order to get the techniques right. The normal life spans of the archetypal tanks are measured in years and not in months, but the life of the fishes vary from species to species. These fish have the potential to live anywhere between 3 to 7 years, and the goldfish can survive for almost 20 years.

If you are taking the care of your fish tank, the right way, the life span of your fish will increase dramatically and they will be able to live out their whole life span. One of the major requirements you will need to pay attention to are the food supplies. The food supply tends to vary with the change of season and guess what, so does the feed amount. Hence, you should try to serve your fish with less food during winter and more during summer. You may already be aware of the fact that small fishes are under constant threat of an attack from the bigger ones, so it may be a good idea to keep the small fishes separately in a tank all on their own. Usually the fish don’t become old and die, but get eaten by others when they grow weak. As macabre as that may seem, that’s a fact when it comes to fishes, of course, the tank could always do them in first especially if you haven’t taken care of it.

Fish tanks can become breeding grounds for various kinds of diseases, so you will need to sanitize the tank when cleaning it in order to protect your fishes from these diseases. The fish can get various types of illnesses, so you’ll need to do all you can to prevent them from becoming sick in the first place. If you’re a hands on sort of person and would prefer to treat the fish on your own, you would be better off hitting the books in the quest of getting information on fish diseases. You’ll need to learn about the various diseases and the effective methods of treatment for the same. In such cases, prevention is much better than cure, and you should clean the tank regularly to avoid these problems. The fish tank should have good-quality water and the fishes should be provided with a balanced diet. Poor quality water can stress out the fish so you’ll need to take care that the water is of good quality and aerated properly. Generally their immune systems are strong enough to protect them from a few disease-causing organisms, but if you prefer not to leave anything to chance, you’ll need to start cleaning the tank on a regular basis. You should check the tank regularly to ensure that the fishes are in good health, and do not end up falling prey to some disease. You can generally make this out form observing any changes in their physical appearance or in their activities. If you do notice the same, then it’s time to start cleaning the filter, the tank and change at least one third of the water in the aquarium.

Medication can be added to the water in the fish tank but it needs to be done carefully. If the fishes are sick then it is better to opt for treating the fish than just dunking them in medicated water. There are a few fish medications that are not effective and can actually cause more harm to the sick fishes. As the physical condition of fishes start to improve, you can start changing the tank water on a regular basis again. You will need to remember that fishes require constant care and you can do so by cleaning the aquarium first. The water in the tank is the main source of survival for the fishes, and carelessness here would result in loss of their lives.

Remember that certain kind of fish require special modifications to be carried out to the tank in order to ensure that they remain healthy. It could be the ambient water temperature, so you will need to check the water temp every now and then, to ensure that there are no accidents. Other than the temperature, you’ll need to ensure that the water is aerated; you will be able to get all you need at any of top of the line pet supply stores. Maintaining a fish tank can take quite a bit of effort on your part but once you have done it a couple of times, it will seem easy. The hard part lies in actually putting your thoughts to action and getting to clean up that tank.

There are some wonderful resources out there like this site on fish tanks [http://bubblyfishtanks.com]. Alternatively, for more information on setting up a fish tank or fish tank accessories in general have a look at this site full of great information regarding fish tank filters [http://bubblyfishtanks.com/11/fish-tank-filters/].

The ebb and flow of stock markets present opportunities to profit if an investor understands these cycles. Since 1900 we have had 27 bull markets with corresponding bear markets to make things interesting. Presently, we are experiencing the 6th longest and the 5th weakest stock market rally as measured by the Dow.

While this is interesting, it would be more helpful if we could better understand these cycles in the market. Well, the stock market does tend to move in cycles, short term (also called cyclical), and long term (also called secular). Secular markets typically can last between 10 to 20 years, while cyclical markets usually last between 2 – 3 years on average. Think of a secular market as the primary long term trend, while a cyclical market is simply a shorter term cycle within the primary long term secular market.

As investors and traders, we need to understand where we are within these market cycles, so we can be on the right side of the trend to enhance our success. For example, the market was in a secular bull market from 1982 – 2000, experiencing a strong primary uptrend where the Dow Jones Industrial Average increased over 10 fold from about a low of 800 to over 10,000. Of course, there were short term bear markets such as in 1987, however, the easy money was made on the long side as the primary trend was up.

However, here’s where the danger lies: The majority of investors today have only experienced a secular bull market, such as the one from 1982 – 2000. Most of us have not experienced a long term secular bear market where the primary trend is mostly sideways to slightly down. The last secular bear market lasted 16 years from 1966 to 1982. Just to give you some perspective, the Dow Jones hit a high near 1000 in 1966, and hit a low in the 800s during 1982. In other words, the Dow essentially was flat for 16 years. During this time, the ‘easy money’ was not made on the long or short side, but by being being a good stock picker identifying undervalued opportunities, special situation stocks, and sectors that are temporarily strong. Understanding whether we are in a cyclical bull or bear market greatly enhances our chances for success.

The problem is that the secular bull market that began in 1982 ended in 2000. Therefore, while the stock brokers advice to hold for the long term was good advice for a secular bull market, it is totally the wrong strategy for a new secular bear market. The market entered into a new secular bear market in 2000, and as history shows, this new secular bear market will probably last at least until 2010 or longer. The market rally from early 2003 until now is simply a cyclical bull market within the new long term secular bear market. Holding for the long term will not work in this new secular bear market.

Let’s look at each secular bull and bear market of the Dow over the last 100 years. As you can see, except for the secular bull market of 1921 – 1929, secular market cycles last on average 16 to 20 years.

- Secular Bull Market, 1982 – 2000, (18 years)

- Secular Bear Market, 1966 – 1982, (16 years)

- Secular Bull Market, 1949 – 1966, (17 years)

- Secular Bear Market, 1929 – 1949, (20 years)

- Secular Bull Market, 1921 – 1929, (8 years)

- Secular Bear Market, 1905 – 1921, (16 years)

Secular Bull Market, 1982 – 2000 (18 years)

Let’s work backwards, beginning with the last secular bull market, which lasted from 1982 – 2000. The Dow increased over 10 fold from a low of about 800 to a high in the 11,000s. The strong primary trend was up and the best way to make money was to be long in your positions. Only the nimble were able to take advantage of the few cyclical bear markets that occurred in 1987, 1991, and 1998. These pull backs were also opportunities to establish new long positions.

Secular Bear Market, 1966 – 1982 (16 years)

Prior to the last secular bull market, the market was in a long term secular bear market which lasted from 1966 to 1982. During this time, the market essentially went sideways for 16 years. For example, the Dow hit a high of about 1000 in 1966, and low in the 800s in 1982. If you would have followed your brokers advice to ‘hold for the long term’ you would have been greatly disappointed. Sixteen years is a long time to receive next to nothing in return on your money.

The chart of the Dow below from 1966 to 1982 is a classic example of what a secular bear market looks like. There were strong cynical bull and bear markets during this time that caused the market to essentially remain flat for 16 years. However, there were shorter term cyclical bull and bear markets that could be traded.

If you could use a time machine and jump forward 10 years from now, I think this how a chart of the Dow or NASDAQ might look. Both traders and investors will need to do their homework, seeking sectors and stocks that present great value opportunities.

Secular Bull Market, 1949 – 1966 (17 years)

The Dow was in a secular bull market from 1949 – 1966. Here the primary trend was up, which is typical for secular bull markets. The easy money was made by primarily remaining long throughout the cycle.

Secular Bear Market, 1929 – 1949 (20 years)

From 1929 until 1949, the Dow was in the famous secular bear market which also defined the Great Depression. After the nightmare crash from 1929 to 1932, the Dow essentially went sideways to slightly up for the next 17 years, but did not reach its old highs near 375 until the early 1950s. However, there were cyclical bull and bear markets during this long term secular bear market.

The Dow experienced the mother of all crashed from 1929 until 1932. Then from 1932 until 1937, the Dow nearly quadrupled from a low of about 50 to 200. Then from 1937 to 1942 the DOW lost about half of its value from near 200 to about 100 (cyclical bear). Then from 1942 to 1949 the DOW recovered (cyclical bull).

Secular Bull Market, 1921 – 1929 (8 years)

From 1921 until 1929, the Dow was in a strong secular bull market. Actually, from a chart perspective this period was very similar to the more recent 1982 to 2000 secular bull market. The primary trend was up, and the easy money was made by buying and holding for the long term.

Secular Bull Market, 1905 – 1921 (16 years)

The Dow was in a secular bear market from 1905 until 1921. This secular bear market was typical of most secular bear markets, such as the one from 1966 – 1982, composed of mostly vicious cyclical bull and bear markets that result in a mostly sideways long term movement.

Hopefully, you realize it is very important to know the market’s primary secular and cyclical trend. During secular bull markets, the easy money is make by staying long. However, during secular bear markets, staying long produces poor results at best and you could lose a lot of money. Stock picking and following the hot sectors is important for success.

Conclusion

The current market entered a long term secular bear market in 2000, and as history shows us, this will last at least until 2010, probably longer. As discussed above, during secular bear markets, the market trades in vicious cyclical bull and bear markets. Therefore, you have to be careful in the stocks you buy and be ready to sell them quickly should the market turn against you. Pull backs or cyclical bear markets will present opportunities to take new positions once they have run their course. It is also important to find value situations and play the hot sectors. You need to be defensive in our positions and for those who are willing to take the risk, you may want to take some short positions.

Trading and investing is much easier in secular bull markets, and much more difficult during secular bear markets. Since we are in a secular bear market for the next 5 to 10 years, it is going to be much more difficult to be successful in your trading and investing.

Currently, the cyclical bull market that begin in early 2003 is close to being over and a new cyclical bear market will begun that will last another 2 to 3 years. This means that the best plays will be on the bearish side for the next couple years, that is, until the next cyclical bull begins.

Hans Wagner runs a web site focused on stock market strategies and model portfolios for the investor and trader at: http://www.tradingonlinemarkets.com

Everyone’s wearing vintage style from the girl on the high street to A list celebrities. Even high street shops are now following suit with their own ranges of vintage inspired clothes. But why is vintage clothing so popular and how can you get the vintage look?

Vintage clothing is described by Trudie Bamford, author of Viva Vintage (Carroll & Brown) as clothing made between 1920 and 1970. Anything before 1920 is antique and anything after is retro. Although many people use vintage as a term to describe clothes that are not brand new. The popularity of vintage clothing is currently huge with large numbers of people owning at least a few items of vintage clothing and some people only ever wearing vintage clothes. Celebrities have fueled the popularity of vintage by wearing vintage designer clothes like Julia Roberts in her Vintage Valentino gown, worn for the Oscars in 2001. In the High Street Oasis and Next have also created there own vintage inspired clothing with similar styles and colors as clothing from various different eras of fashion.

The popularity of vintage clothing is probably due to three factors. The individuality of vintage pieces is a real attraction to many people. The range of clothing on the high street almost always follows the seasons trends. You are much less likely to see someone wearing the same or a similar outfit if you wear vintage clothing. Many will use one key piece of vintage clothing or an accessory to give an outfit bought on the high street an individual twist. Vintage clothing has also proved popular as many love the beautiful , delicate and detailed ladylike styles that can be found when buying vintage clothing. Many vintage clothes lovers have a keen interest in the history of fashion and finding vintage clothing is an interesting hobby.

Key looks such as 1940′s Dior New Look frequently inspire designer and high street main stream collections and those who wear vintage clothing have the benefit of wearing the ‘real thing’. Finally the beauty of vintage clothing is often in the quality of the garment. The vintage clothing that has stood the test of time and has managed to remain in a reasonable and wearable condition will usually be of a superior quality to many clothes mass produced in the present day. Clothing made before 1960 is probably handmade and quality natural materials such as silk and wool were used as man made and synthetic materials were not available. Styles and trends of clothing did not change as frequently as it does today so clothes were made to last.

Buying vintage clothes can be a time consuming business. Finding the right item takes time. There are many shops specializing in vintage clothes, charity shops and flea markets are also good hunting grounds. The internet provides an excellent resource for finding vintage clothes. eBay is treasure trove for vintage clothes and you can often get a real bargain if you look hard enough. There are also many online vintage shops which make it easier to find the item you are looking for but are likely to charge a bit more for the privilege.

A word of warning, there are some key pitfalls to watch out for when buying vintage clothing. Do not automatically trust the sellers description of the item. Check for indicators of the age of the items such as metal zippers and buttons instead of plastic on pre-1950′s clothes, any clothing with a care instruction label will be post 1970′s. When buying designer vintage you will need to do your research to ensure that the item you are purchasing is genuine. It also important to consider the quality of any vintage clothing that you would like to buy. When buying online you will not be able to assess the quality so should ask key questions to make sure you are happy with your buy. Due to the very nature of vintage clothing, it will be in varying conditions. Wear and tear can range from the easily solved tear along a seam or small moth hole to less desirable underarm perspiration stains.

Finally sizing can present a problem when buying vintage clothes. Sizes have changed quite a lot over the years and a size 12 item from the 1950′s may be the equivalent of a side 6 or 8 now. It is also possible that clothing can have shrunk in the wash making it even smaller than expected. If unable to try the item on use a tape measure to measure yourself and ask the seller to do the same with the clothes.

When you manage to find the beautiful vintage item that you really love, look after it well. Check the type of material and find out how it should be cleaned. If in doubt take it to a professional dry cleaner. Store carefully using acid free tissue paper for very delicate items and moth balls/ cedar wood for wool.

This article was written by Ceri Heathcote for Designerhighstreet.com For all the latest fashions including party cocktail dress and ladies evening dress